image
image

image

 


 IVF Clean Air100C Air Filtration Purification100C Air FiltrationFilter AirOur StaffSearch Filtration SiteContact Air FiltrationAir Filtration Home PageZander IVF

ZAND-AIR™ 200
Photo Catalytic Air Purification System

image

  Photocatylic Air Purification Filtration  
 
ZAND-AIR™  200 Photo Catalytic
Air Purification System
 

The ZAND-AIR™ 200  is a revolutionary breakthrough in technology for in-line, ducted, multi­phase filtration HVAC systems. The system incorporates leading-edge photo catalysis and high-efficiency MERV 11 particle filtration, and converts volatile organic compounds (VOCs) and chemically active compounds (CACs) into water (H2O) and carbon dioxide (CO2) , while capturing sub-microscopic-particles.

The ZAND-AIR™ 200   Photo Catalytic Air Purification System is designed to be incorporated in new or existing construction and renovations to provide people and laboratory environment protection against indoor air pollutants. The uniqueness of this product lies in its ability to clean and eliminate all VOC and CAC pollutants within the capacity of existing blowers and HVAC equipment.

 

 

ZAND-AIR™ 200  Air Purification System- Technical Specifications

  • Dimensions: 21 1/4" x 27" x 10 1/4" (54 cm x 69cm x 36cm) (overall) Sleeved,drawer-type design for serviceability and easy access.
  • Weight: 34 Ibs. (15.5 kg) (approximate shipping weight)
  • Particulate Filter: 20" x 25" x 4" (nominal)- Pleated, pure synthetic MERV 11 rating according to ASHRAE. Standard 52.2 (4-5 microns, 88%; 1.6 microns, 73%, 0.3 microns, 24%)
    Two UVGI (ultraviolet germicidal irradiation) lamps rated at 9,000 hours life.
    Proprietary honeycomb 20" x 25" x 3/4" panel coated with Titanium Dioxide for Photocatalytic oxidation effect.
  • Airflow Capacity: Up to 2,000 CFM / 185m2 (500 ft. 23m/Min. face velocity).
  • ETL (certified): Independent laboratory test results available upon request.

A typical Installation of the ZAND-AIR™ 200

  Installed Air Filtration Purification System  
 
ZAND-AIR™ 200   Typical Installation
 

 

This photograph shows, viewed from below, the installation of 3  (three units) ZAND-AIR™ 200  frames installed as a battery below the roof, above a drop ceiling, mounted into the HVAC enclosure. Note the separate electric outlet to allow unplugging the ZAND-AIR™ 200 filter drawers for removal and servicing of these three filters outside of their frame structures. This 3-unit combination requires only one MERV-11 filter -upstream- to filter the airflow.

 

 


ZAND-AIR™ 200   Photo Catalytic Air Purification System Expanded View

Filter

 

Additional Links:

 

 

*The filter set consists of two filters and two UV lamps. The filter to be replaced every 6 months, and the two UV lamps every 12 months.

image

Site by WebInnovations.org

 

 
image
image
 image